NuStair: Installation & Promotional Videos

We provide stair remodeling videos over on our YouTube channel. Learn more about the NuStair stair remodeling system and products below:

• NuStair Stair Remodeling Product Overview
• How to Remodel Stairs with NuStair
• NEW! Introduction to Adjustable Balusters

• NEW! Open Sided Staircase Remodel With Adjustable Iron Balusters
• NEW! Open Sided Staircase Remodel With Adjustable Wooden Balusters
• NEW! How To Install Adjustable Balusters
• Before & After NuStair Staircase Remodel
• NuStair Adjustable Staircase Balusters

NuStair Stair Remodeling Videos – Product Overview

How to Install Stair Treads Over Existing Stairs

The revolution in stair replacement is here! NuStair and the Stair Fitter system will revitalize your worn out or boring stairs. Transform stairs from old, damaged stairs into a beautiful, solid hardwood staircase. The best part is it only takes hours, not days. NuStair has many stair tread colors to choose from, and we only use high quality hardwood. Save hundreds or even thousands of dollars over traditional methods, and the look is nothing short of amazing! To learn more, contact us today.

How to Remodel Stairs with NuStair

Read more about how to remodel stairs with NuStair and the NuStair installation process.

Introduction to Adjustable Balusters

Open Sided Stair Remodel With Adjustable Iron Balusters

Step-by-step: How to refinished an open sided staircase using NuStair prefinished stair treads and our adjustable iron balusters. Perfect for DIYers or contractors.

1. Remove carpet from stairs (if installed)
2. Cut tread ends flush to outside wall
3. Remove existing newel post
4. Apply shims and first riser. Riser should be flush with existing tread nosing.
5. Nail along top of riser where next tread will cover. Apply minimal nails along bottom.
6. Apply NON water based adhesive to existing tread and install first NuStair tread.
7. Nail along back edge so that next riser covers nail holes.
8. Install new newel post and attach to handrail.
9. You can now remove current balusters.
10. Install second riser and Nustair tread.
11. Continue until all treads are installed.
12. Install stair brackets to cover gaps between new and old risers.
13. Install top adjustable shoes. These should cover any existing holes.
14. Cut and install balusters with bottom shoes.
15. Install Remaining balusters until complete.

Open Sided Stair Remodel With Adjustable Wooden Balusters

Step-by-step: How to refinished an open sided staircase using NuStair prefinished stair treads and our adjustable wooden balusters. Perfect for DIYers or contractors.

1. Remove carpet from stairs (if installed)
2. Cut tread ends flush to outside wall
3. Remove existing newel post
4. Apply shims and first riser. Riser should be flush with existing tread nosing.
5. Nail along top of riser where next tread will cover. Apply minimal nails along bottom.
6. Apply NON water based adhesive to existing tread and install first NuStair tread.
7. Nail along back edge so that next riser covers nail holes.
8. Install new newel post and attach to handrail.
9. You can now remove current balusters.
10. Install second riser and Nustair tread.
11. Continue until all treads are installed.
12. Install stair brackets to cover gaps between new and old risers.
13. Mark and drill bottom holes for new adjustable balusters.
14. Measure and mark top of adjustable balusters for cutting.
15. Slide adjustable sleeve up to bottom of handrail and nail into place.
16. Install remaining balusters until complete.